 |
|---|
|
|
|
ASSEMBLY PRESENTS The INTEGRATED SHOWCASE
A collection of great products and services from all over the world that can provide you with new ideas and opportunities to answer challenges at your manufacturing facility. Watch for this great new section each quarter in your ASSEMBLY MAGAZINE and through electronic distribution. If you are not included in the ASSEMBLY Digital data base, visit the all new ASSEMBLYMAG.com and register for our great E-news letters and other digital content options now!
|
|
 Use Creform 42MM
Heavy-Duty Workstation Anywhere In The PlantMobile work surface for on site maintenance and repairs or spare workstation at permanent cells. Easily moved, designed to fit through standard doors. 650 lb load capacity without bracing. Creform Placon® Plastic Wheel Conveyors present boxes, totes or unpackaged parts. Computer monitor mount, overhead light, tool balancer and more. Available kitted or assembled.
| |
 Eraser's Portable Wire Strippers are Fast and ProductiveDCF Series Wire Strippers from Eraser use centrifugal force to cleanly remove insulation from round magnet and enamel wire from 35-9 AWG. Ideal for close-up stripping of coils, chokes, transformers and more. The variable speed power unit covers a 20 gauge range with no extra tooling or setup needed. Optional Bench Kit available.
The Eraser Company, Inc.PO Box 4961/123 Oliva Drive Syracuse, New York 13221 USA (800) 724-0594 or (315) 454-3237 info@eraser.comwww.eraser.comISO 9001: 2008 Certified
|
|
|
 Automatic O-Ring Assembly ToolPneumatic multi motion parallel gripper facilitates o-ring placement, part ejection or part seating. Two size available, both have independent spreading, ejector movements providing hexoganal or octagonally stretched O-ring requires less overall expansion and considerably less deformation during assembly process. The ejector jaws push off the O-Ring seal onto the part being assembled.
| |
 Nordson EFD Dispensing
Solutions Video GalleryNordson EFD, the world's leading precision fluid dispensing systems manufacturer, announces its new website Dispensing Solutions Video Gallery. More than 60 videos are available featuring dispensing-related applications, technologies, solutions, and product information. The video gallery can be found at www.nordsonefd.com/videos. Contact our experienced Product Application Specialists to discuss your specific application requirements.
|
|
|
 Compact Electro-Mechanical Servo Press ModuleThe Kistler Type 2151B…NCFH servo press module offers end users and machine builders a compact, energy-efficient solution for assembly operations. The compact press module features a direct drive motor, precision-force measurement and can be flange or wall-mounted. The NCFH covers a range of pressing forces from 1kN to 60kN in two physical sizes.
| |
 Tri-Star's New Mold-In Precision Brass InsertsDesigned for molding into plastics, rubber and ceramics. MC-Series inserts have a "closed-end" bottom, preventing plastic flow into the threads. MT-Series is ideal for thru-thread applications. • Controlled Minor Diameter for accurate positioning on core pins • Aggressive knurling provides high resistance to tensile pull & rotational torque loads
|
|
|
 Robotic Dispensing, Welding & Assembly MachinesFusion Systems Group builds turnkey machines that provide years of cost-efficient production. Assembly Machines, Material Handling, Welding, Robotic Dispensing, etc. Visit our web site, review the machine examples and discover our diverse capabilities. Let us solve your manufacturing process problems. Contact us today for a quotation on your next machine or automation project.
| |
 The Newly Improved All-in-One Processing ModuleIs reliable dispensing an open issue in your production? The Scheugenpflug Processing Module performs all dispensing tasks, such as potting, filling, dabbing etc. It includes dispenser, control unit and axis system. With its plug&play design, integration in production lines is easy. Two models, Basic and Premium, offer different maximum traversing speeds.
|
|
|
 RACO – The Versatile Electric ActuatorRACO Electric Actuators provide a reliable solution for all of your linear motion needs. A variety of design configurations provide a multitude of thrust and speed ratings. RACO Electric Actuators are designed to be robust with virtually no maintenance while also being economical to operate and friendly to the environment.
| |
 Series 500 Sealant TestersToday's engineers and builders demand high-performance, long-lasting sealants for use in their products and designs. ATS has developed the Series 500 line of Sealant Testing Machines, which are designed to simulate the expansion and contraction of sealant joints in actual installations, even under extreme conditions of sweltering heat and bitter cold, for the most realistic and accurate results possible.
|
|
|
 ATC Automation provides custom assembly and test systems for a variety of industries including automotive, life science, energy storage, and consumer products. As an ISO 9001:2008 certified company, ATC offers engineered solutions in all facets of discrete part assembly from "factories in a box" to integrated lean cells.
| |
 All Electric Servo Press Work StationThe fully electric Promess Work Station has been designed for a range of uses including production, product development, process development, prototype builds, part testing and training. With its precision servo driven ball screw press and built in force and position monitoring, the Promess Work Station, in its various configurations, is capable to accommodate press forces from 0.2 kN to 500 kN.
|
|
|
 Servo Indexing At Mechanical Indexer PricesEZ Indexer® from Centricity, high precision state of the art servo indexers. Complete servo system includes indexer, servo motor with AC drive, cables, and Excel® based spreadsheets for simple setup. Loads from ounces to tens of thousands of pounds for dial diameters from 8" to over 20'. Robust construction and maintenance free. Many sizes available from stock for immediate delivery.
| |
 Bench-Top In MotionTechcon Systems dispensing robots are easy to program, simple to operate and compatible with all valve technologies. These versatile dispensing platforms deliver consistent, high performance dispensing results, at an affordable price. Techcon Systems robots provide total control over fluid placement from dots, beads, arcs and circles.
|
|
|
 Gorbel G-Force® Intelligent Lifting Systems: G-Force Intelligent Lifting Systems provide the best of both worlds: the responsiveness and flexibility of a human operator with the power of a machine. Capable of hoisting 165 to 1320 lbs., G-Force Intelligent Lifting systems increase productivity and reduce product damage, all while creating a safer work environment.
| |
 Gain instant visibility with RFID and barcode technologyBalluff's traceability solutions with Radio Frequency Identification (RFID) and barcode technology combined with application software, provide direct visibility into the manufacturing process. Traceability in manufacturing enables organizations to create lean manufacturing processes, simplify just-in-time delivery, aid legal certainty and ensure product quality. Learn more and read our white paper at www.balluff.us/traceability
|
|
|
 Pass/Fail Marking SystemSprinter dot marking machines can apply "dot" codes to products after testing up to 350 CPM. Ink dries in seconds and is available in rainbow of colors.
| |
 Powerful Miniature Parallel Gripper MPG plusThe oval piston drive, combined with roller bearings, assure an enormous degree of efficiency. Due to the high force and moment load ratings, same size units also work with longer gripper fingers to achieve higher gripping forces. The MPG-plus can be used with programmable magnetic sensors MMS-P and micro valves.
|
|
|
 Cutting-edge riveting process monitoring and controlWith the new HPP-25 Process Controller available on all Baltec riveters, Baltec is continuing to set new standards in riveting process monitoring and control. The new HPP-25 process controller consists of a basic control unit with several add-on modules. Six different parameters and up to 39 program modes are available for controlling the riveting process.
| |
 Self-Retaining Expansion Nut AutomationSREN Setter HX is a handheld pneumatic tool that installs Tinnerman or CIP self-retaining expansion nuts into instrument mid-panels and other structures. The 25-piece magazine can be reloaded in two seconds via the docking station and vibratory feeder. All equipment and controls are mounted on a compact, portable base.
|
|
|
 Micro Tool Changer ATI Industrial Automation's QC-001 Micro Robotic Tool Changer was developed for extremely light payloads and features a highly compact and lightweight design for high-speed "spider" or parallel-link robots. This new Tool Changer enhances the flexibility of these robots by enabling them to switch end-effectors automatically. Multiple assembly, dispensing, sorting, and material handling operations can be performed by one robot, greatly increasing productivity, while reducing downtime for change-overs.
| |
 GB801 High Production Power UnitThe GB801 high production power unit system combines high-speed blind rivet installation with low-maintenance. That converts to thousands of dollars in savings over the life of the unit. No more double pulling or frequent bleeding as with standard bottle tools, just BANG, BANG, BANG – rivet after rivet! It's designed to power a pistol-grip or in-line tool system that can install a huge variety of rivets.
|
|
|
 Fiam® Air Tools Available Exclusively Through ASGNow you don't need to travel to Italy to hold the premium quality of Fiam air tools in the palm of your hand. ASG is the exclusive North American Master Distributor of Fiam brand air tools and systems. Thousands of products – screwdrivers, nutrunners, air motors, fixtured nutrunners, and more – cover a huge torque range to solve your assembly challenges.
| |
 An Industry First: Rapid Swap Spindle Groups with Same Controller To increase robot fastening productivity and flexibility, look no further than the Intelli-Swap System paired with DGD® Intelligent Spindles. When used with a tool changer, rapid plug-and-play swap from one set of spindles to another is possible with the same controller. • No need for multiple robots • Reduced capital equipment cost • Lower total cost of ownership
|
|
|
 A robot coming out of its cageThe lightweight, flexible Universal Robots have reinvented industrial robotics, automating production in all assembly industries – even in SMBs regarding automation as costly and complex. The portable robot arms are easily moved to new tasks - they can operate without shielding and are programmed through intuitive touch screen. Average ROI: 3-8 months.
| |
 PACENTER: Technical Training and Information from PACE "For over 50 years, PACE has provided state of the art, hands-on solder training. By combining valuable industry insight and knowledge, PACE can improve your company's performance and individual skill set. PACENTER offers: Training Process Guides, Application Support Services and On-site Training classes for Soldering, Repair & Rework for Electronics."
|
|
|
 Solutions for the Global Assembly MarketCombine STANLEY's AA pneumatic high-precision clutch tools with the PSI-Q Qualifier for improved assembly quality through error-proofed, batch counted fastening cycles. Missed or incomplete fastening cycles such as re-hits, cross-threads and slip-offs are indicated and corrective actions can then be applied before the assembly is shipped.
| |
 Compact PressControl 600 Intelligently Controls Servo Press ProcessThe compact SCHMIDT® PressControl 600 can now operate and control the company's ServoPresses and TorquePresses in a single axis configuration. It provides 100% in-process monitoring and delivers process data acquisition and management capability. Results for each press cycle are instantly displayed on touch-screen interface panel. Operates in single workstation or as a module within automated production line connected to system control.
|
|
|
 Dopag Metering and Dispensing ValvesDopag's line of positive displacement metering valves provide the highest metering accuracy possible at an affordable cost. The Hilger U. Kern/Dopag Group has been offering quality solutions to complex metering and dispensing problems for over 30 years. Call today or visit our website for more information.
| |
 Automatic Inline Feeder Systems from Design Tool, Inc.Our Automatic Feeder Systems feed and drive any type of fasteners into most applications for all assembly lines. The patent feed has only one moving part for simplicity and for fast productivity! DTI is built for heavy industrial output and is designed for any brand of drivers. Please contact us now and we can increase your productivity 40-50% with automation.
|
|
|
 High Speed, High Precision, Electro-Mechanical ActuatorHyperCyl-EMA® provides the speed and accuracy required for precision manufacturing. H y p e r C y l - EMA® offers speeds reaching 500 mm/sec, repeatability of .00254 mm and Output Forces from 5-230 kN. Add the HyperView- Press® for Active-Cycle Quality Control to further reduce costs and part nonconformance. HyperCyl® also offers Hydra-Pneumatic solutions, applications engineering, testing, tech-support, and the best warranty in the industry! MADE IN THE U.S.A. "Speed, Precision, Power".
| |
 The TC500 is the ideal solution for permanent marking of automotive components, electronics, medical devices and a wide range of parts with logos, linear and radial text, DataMatrix™ including UID, serial numbers, counters, dates and shift codes. The TC500 is simple to integrate and is designed for industrial environments that demand a robust and reliable marking solution.
|
|
|
 Stäubli TP80 Fast PickerTP80 is an extremely fast robot designed to handle operations with small parts (under 1 kg) with sustained 200 picks per minute (ppm) capability. The TP80 is particularly well-suited for packaging applications in various markets such as food, pharmaceuticals, photovoltaics and cosmetics.
| |
 End-of-Arm Tooling That's Engineered to be the Best.SAS Automation designs, builds, and services End-of-Arm Tooling (EOAT) for all makes and models of robots used in auto, electronics, chemical, rubber, plastics, metal, industrial machinery and food.
|
|
|
 Fastening Spindle for Flexible AutomationPrecision feed and drive system for incorporation into fully automated assembly cells. A Visumatic Power Module will bit-stroke the fastener into mating parts and can be configured to operate in any plane, including vertically up! The VPM is the machine builder's most popular EOAT choice for six-axis robot integration.
| |
 Feel the freedom with Wireless & Cordless ToolsThe ELIT cordless range fits a variety of applications in the automobile, tiers, aerospace and general industries. This generation of battery tools offers mobility, ergonomics and now reporting capabilities. Pistol or right-angle tools, a lithium-ion battery and a high-efficiency brushless motor bring performance to your production line. The wireless reporting ELITBOX offers communication with your process by integrating tightening results.
|
|
|
 SANKYO America Inc. "To be the Chosen Automation Partner"Sankyo has provided the world's manufacturers with a variety of products designed to increase productivity. We are committed to the creation of new products that will benefit our customers using our previous experience and our passion for "Monozukuri", the art, science, craftsmanship and continuous improvements as it applies to manufacturing.
| |
 HERNON 2 Component Mixer/DispenserAutobonder 2700: Features: • Variable ratio dispensing at the touch of your fingers • Infinite mixing ratio control • Remote start / stop capabilities • Uses standard, low-cost, disposable, static mixer tips • Timer, volume or continuous dispensing modes • User friendly color touch screen controls • Utilize with Hernon Tuffbond 370AB or 375AB structural adhesive
|
|
|
 Rebalance with Minimal Cost, While Maintaining QualityeFlex Assembly is a complete assembly solution that is flexible, data-driven, standardized, seamlessly integrated and lean. Key Features Include: reconfigurable without re-programming, plug-n-play standardized hardware design, pre-engineered technology solution encompassing most assembly scenarios, clear analytics that support and improve decision-making, and flexibility enabled through clearly-defined process standards.
| |
 Leak, Flow and Electrical
Testing Instruments.ATEQ Corp. is a manufacturer of leak and flow testing instruments. The methods used are: air, hydrogen and high voltage. New technical developments contribute to better speed, accuracy and repeatability. Compact design and touch-screen provides versatility. Ethernet and USB ports are standard. Efficient testing and ease of automation are the highlights of the new generation of ATEQ leak testers. ATEQ USA is a member of ATEQ worldwide group of companies and our products are sold and serviced in 32 countries.
|
|
|
 Your Worksurface. Our Bench.Our C-Leg Component Kit is an easy way to use your own specially sized worksurface, surface material or equipment. Component Kit includes heavy-duty workstation structure, legs and hardware- you decide what to put on top! Tweet #cleg813 for more information about sizes, finishes and options. Designed and manufactured in the United States.
| |
 Adhesive Dispensing SystemsNordson SEALANT EQUIPMENT provides precision dispensing systems and valves for assembly applications dispensing epoxy, silicone, urethane and acrylics for bonding, molding, gasketing, potting and sealing in robotic and manual applications. Our systems apply adhesive correctly, reduce waste and lower production costs. Systems can be integrated with automation for multiple product configurations.
|
|
|
|
|
Posts
